Real material exquisite technology connection firm/high corrosion resistance/heat resistance/pressure resistance/dark construction/beautiful appearance
The leak-proof design is safe to use
Integrated forming process one-stop hydraulic joint
The tube is flexible and flexible
Suitable for a variety of mounting angles
Easy and quick installation
Socket installation: Plug in the socket and tighten it to complete the installation. Screw installation: unscrew the socket with the disassembly tool
PVC flame retardant skin
It has the function of an open flame
Resistant to heat and cold/frost/crack/safe to use
Precautions
- Must be installed by gas professionals
- One end is connected with the stove inlet pipe, and the other end is connected with the stove front valve through the transition piece. It is forbidden to directly connect with the pipe nut
- Turn off the air source before installation.
First of all, check the hose to see if there is any surface damage during transportation
05 Check whether the two ends of the nut are connected with sealing rings. - After installation, apply a small amount of soapy water to the joint to check whether there is leakage caused by improper installation
- Close the air source valve after use.
Check whether the pipe body and seal ring are damaged or missing after you move and disassemble the cooker - The gas hose should be used immediately after being unpacked to prevent damage to the pipe body caused by excessive cumulative bending times caused by others.
The minimum bending diameter of stainless steel bellows must be greater than 30mm.
